NPS | DIA bolts (in) |
Length RF |
Length RTJ |
Number of bolts |
1/2 | 1/2 | 75 | 75 | 4 |
3/4 | 5/8 | 90 | 90 | 4 |
1 | 5/8 | 90 | 90 | 4 |
1¼ | 5/8 | 95 | 95 | 4 |
1½ | 3/4 | 110 | 110 | 4 |
2 | 5/8 | 110 | 110 | 8 |
2½ | 3/4 | 120 | 120 | 8 |
3 | 3/4 | 125 | 125 | 8 |
3½ | 7/8 | 140 | 140 | 8 |
4 | 7/8 | 145 | 145 | 8 |
5 | 1 | 165 | 165 | 8 |
6 | 1 | 170 | 170 | 12 |
8 | 1.1/8 | 190 | 195 | 12 |
10 | 1¼ | 215 | 215 | 16 |
12 | 1¼ | 220 | 220 | 20 |
14 | 1.3/8 | 235 | 235 | 20 |
16 | 1½ | 255 | 255 | 20 |
18 | 1.5/8 | 275 | 275 | 20 |
20 | 1.5/8 | 285 | 290 | 24 |
24 | 1.7/8 | 330 | 335 | 24 |
General notes:
- Dimensions are in millimeters unless otherwise indicated.
- Length dimensional tolerances for all Stud Bolts:
length to 12 inch tolerance = ± 1.6 mm
length over 12 inch to 18 inch tolerance = ± 3.2 mm
length over 18 inch tolerance = ± 6.4 mm - The length of the Stud Bolt does not include the height of the chamfers (points).